| Holding Torque: | 48kn.M |
|---|---|
| Tilting Moment Torque: | 72kn.M |
| Output Torque: | 6.8kn.M |
| Output Speed: | 2.1rpm |
| Gear Ratio: | 84:1 |
| IP Class: | IP65 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Coresun Drive slewing drives worm gear can be widely used for grapple machines, Aerial platform, forklift ,mobile crane ,Drilling Rig ,solar tracking system, wind turbine and satellite dish.Those products are designed for long life, working in hard environmental conditions.Hourglass worm shaft is used in each sized slewing drive for better efficiency, more torque and smoother rotation by multiple tooth contact with the slewing rings
Slewing drives are compact rotation units built into an iron casted housing that contains a slewing ring with a gear. A worm gear rotates a slewing ring with high precision; it enables maximum gear torque and smooth rotation. Slewing drives can handle axial, radial and tilting loads and are fully sealed.
Slewing drives are compact rotation units built into an iron casted housing that contains a slewing ring with a gear. A worm gear rotates a slewing ring with high precision; it enables maximum gear torque and smooth rotation. Slewing drives can handle axial, radial and tilting loads and are fully sealed.
The worm-gear type slewing drive is developed by the slewing bearing. It is composed of housing, a turbine ferrule, a worm gear, a motor and kits. Compared with the conventional slewing bearing, the structure is compacted, safe and modularity.
Slewing drives are perfect for situations requiring both load-holding and rotational torque from the same gearbox.Ttypical applications include solar trackers, wind turbines, satellite and radar dishes, truck cranes, man lifts, utility equipment, hydraulic equipment attachments, oil tool equipment, tire handlers, digger derricks, and automotive lifts.
This increased tooth engagement results in greater strength, efficiency and durability.The slewing drive uses standard worm technology in which the worm on the horizontal The speed ratio of the shaft depends on the relationship between the number of threads on the worm and the number of teeth in the worm gear or gear.The specifications of the drive and gear depend on the material of the gear. However, most of the drives and gears typically used consist of steel and phosphor bronze. According to a wide range of tests,chilled nickel-phosphorus bronze ranks first in terms of Wear resistance and deformability
WH is a heavy-duty series slew drive comprising for higher capacity and one or two worms acting upon one wheel yielding maximum torque at the smallest size and weight. Typical applications are steering gears for heavy transportation, rock drill rigs, tilt rotators attached to excavators, and antenna drives. If space is not a limitation, a WH slew drive may be used which would be larger in width (diameter) and would have an increased weight compared with a WH worm drive of a comparable output torque and moment load capacity. However, the total height of the WH drive would be smaller than a WH unit.
1, What are the differentiates between Dewin with other supplier?
Profession and reliability.
Our advantages are multiple available technologies, strong quality assurance, and good at project & supply chain management.
2, Is there a cost for Dewin service?
There is no additional cost above the product and tooling price except third party service.
3, Will I be able to visit the supplier myself?
First, all of our supply partner has undergone a series of screening and audit process, we can provide complete audit report to you.
Secondly, if you want to perform your own independent supplier audit procedure, our representatives can accompany and assistant with you to achieve it.
4, How to deal with the quality problem?
A. With our partners we perfom APQP at early stage in each project.
B. Our factory must fully understand the quality concerns from customers and implement product & process quality requirements.
C. Our quality professionals who perfom patrol inspection in our factories.
We perform final inspectors before the goods are packed.
5, Can you take responsibility for me?
Of course, I'm happy to help you! But I just take responsitility fo my products.
Please offer a test report.
If it was our fault, absolutely we can make a compensation for you, my friend!
6, Do you like to serve the client only with small order?
We enjoy to grow up together with all our clients whatever big or small.
Your will become bigger and bigger to be with us.
For Coresun Drive's slewing drive worm bearing, raw material testing, process testing, finished product testing should be made for ensuring the 100% quality production.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}